laser cutting and engraving machine, laser engraver

Fiber Laser Marker LSF10

LSF10 Fiber laser marker has a lot of advantages comparing with the traditional solid-state laser marker which uses crystal rod as laser marker medium. It is adopted very long Ytterbium doped double clad optical fiber as laser medium, and is pumped by high power multi-mode diode laser. So it has very good laser beam quality TEMoo.

Request for quote/more info

Highlights

Excellent laser beam quality
It is fundamental mode (TEMoo) output, and its diameter of focus laser dot is less than 20 micra. So Fiber Laser Marker is suitable for marking    accurately.

Low energy consumption
The maximum optical-electric transferring efficiency is 30%. The input is power of this equipment is less than 500W. Long-term using this type of    machine can save a large amount of energy consumption expenditure for    users.

No maintenance
LSF10 Fiber Laser Marker does not need any maintenance. No need adjusting or cleaning lens either.

Long life-time of lasers
LSF10 Fiber Laser Marker is adopted laser diodes as pump source, its    average working time can reach 100,000 hours.

Compact, suitable using in bad environment
Fiber laser has very good flexibility and is designed very compactly. It has good heat loss effect, so it doesn't need big water cooling system, air cooler is enough. It can work in high vibrating, high temperature and dusty working environment.

Applications

Technical Specifications
Model No	LSF10	LSF20
Laser average output power	10	20W
Wavelength	1.00-1.10nm
Power adjusting range	10~100%
Repetition frequency	20~80KHz
Beam quality (M²)	1.4~1.8
Divergence	0.3mrad
Optical-electronic efficiency	30%
Operation system	WIN98/2000 / XP
Computer interface	Ethernet (optional)
Urgent stop	have
Marking method	Static or flying marking
Max. linear speed	7000mm/s
Marking depth	0.01~0.2mm
Min. focus laser diameter	0.01 mm
Min character height	0.2 mm
Repetition accuracy	0.2 µ m
Marking format	Figure, characters, bar code, data matrix, date, order of runs, lot number, serial number, file chaining
Marking character type	Support PLT, DXF BMP file etc., using SHX, TTF character storage directly
Dimension	550mm x 290mm x 570mm
Weight	30Kg (excluding PC and monitor)
Power supply	100~240V, single phase, 500W
Cooling system	Built-in air cooling system
Specifications are subject to change without notice