Our
Sandcarving System is the
today's need for Trophy
& Awards Industries.
We offers everything needed
to run a sandcarving business
including sand blasting
equipments, substrates &
training.
Equipment
& Materials Required for
Material Procress
1.
Sandcarver Unit
2.
Compressor
3.
Film Exposer Unit
4.
Washout System
5.
Sand Blasting Film
6.
Adhesive ( Only for Pro Blue
Film )
7.
Alluminium Oxide (Sand)
Type
of SandBlasting Films
ImagePro
Blue
Our
most humidity resistant photo
resist film.
Easy carrier sheet removal
Eliminates blotting step.
Fast exposure-30 sec. for
3 & 5 mil
Not special room lighting
required
Superior detail capabilities
Excellent for colour filling
& multi level sand carving.
It is available in two type:
3 mil (75 microns): Requires
minimum 180 grit and positive
film density
of 3.0 Blast depth from front
to approx 1/16".
5 mil (125 microns): Requires
minimum 180 grit and positive
film density
of 3.0 Blast depth from front
to approx 1/4".
UltraPro
Self Adhesive Film
Ideal
for multilevel sandcarving.
No adhesive application
Quick exposure and development
Fast uniform blasting results
Detailed resolution
Superior detail capabilities
It is available in two thickness:
3 mil (75 microns): Requires
minimum 180 grit and positive
film density
of 3.0 Blast depth from front
to approx 1/16".
5 mil (125 microns): Requires
minimum 180 grit and positive
film density
of 3.0 Blast depth from front
to approx 1/4".
RepidMask
- Dry Process Sandcarving Film
Dry
Processing
Self Adhesive
Fine Halftone making ability
Strong Blast resistance
RepidMask requires photo-NEGATIVE
artwork. Clear =Blast.
It is available in two thickness:
2 mil (use minimum 220 grit
size and negative artwork with
Dmax
3.0)
Blast depth can be taken from
frost to approx. 1/16"
4 mil (use minimum 180 grit
size and negative artwork with
Dmax
3.0) Blast
depth can be taken from frost
to approx. 3/16"
Laser
Tape
Apply - Laser - Blast
No
PVC!
Fast & simple clean up -
Peels off easily
Quick burn
Easy to colourfill after sandblasting
Conforms smoothly to surfaces
without wrinkling.
Available in 4 mil.
3 mil (75 microns): Requires
minimum 180 grit and positive
film density
of 3.0 Blast depth from front
to approx 1/16". 
